Efficiently Distribute Heat Throughout Your Room
A Once-in-a-Lifetime Purchase
Do you have a chilly corner or two in your home despite your wood stove pumping out heat?
Then get this quiet, simple, and ingenious device to immediately reduce the chill in your house, and maximize your home comfort for the cold season. This stove fan is powered by transforming heat into energy, without using any battery or electricity.
Specially designed for wood stoves, this fan multiplies the effectiveness of your wood stove by circulating its surrounding hot air all around your home, with zero inconvenience for you.
✔ Keep Warm. Reduce the winter chill in your house by spreading the warming heat of your stove much farther — and all without needing any effort on your part!
✔ Heat-Powered. The heat-powered electric fan spreads heat more widely in your living spaces with complete, automatic ease. No batteries, no turning on or off, no annoying cords, no worry for power outages!
✔ Silent. Quietly moves warm air from the stove top — almost zero noise.
✔ Efficient. Based on a phenomenon known as the Seebeck effect, the fan uses thermocouple technology to generate an electrical current by exploiting the temperature difference between the stove top and the ambient air. That means up to 28% less wood use!
✔ Eco-friendly. It costs nothing to operate as it uses the energy source already coming off your stove. No batteries or electricity required.
✔ Automatic. It turns on once the base of the fan reaches 140°F (60°C), so any surface (or any kind of stove) that reaches this temperature will power the fan, with the hotter the surface resulting in higher fan speed.
✔ Safe. Built-in, automatic overheat protection keep your fan from getting accidentally damaged when you stove gets hot.
Frequently Asked Questions:
“How does this work? Is it magic?”
No, it’s physics! This fan uses an innovative thermo-electric device to generate electricity directly from heat to run the fan. The electrical energy is generated from the thermal energy flowing through the device from the bottom (hot) portion of the fan stand to the top (fan-cooled) portion of the stand. The effect was discovered in the early 1800s and while it is used rarely today, wood stoves offer a uniquely large source of thermal energy, making powering a wood stove fan a perfect situation for the technology.
But most of all — regardless of how it works — it is effective!
“I don’t have a wood stove. Will this work with my pellet, coal, barrel, propane, etc. stove?”
Yes, it will! The fan works on any surface that gets hot enough to cause it to generate power for the fan motor. The base of the fan just needs to get to around 140°F (60°C) to move significant air, though the hotter it gets, the more powerful the fan rotation will be. If the design of your stove is such that it produces a hot surface on which the fan can be set, it will work great! If you have a grate, insulation, multiple layers on the top surface, it is less likely to be a good option, but you could try to measure surface temp (eg, drip a drop of water on it at full temperature to see if it boils would be one easy way) to see if it’s a good solution.
“Does this fan sit on top of stove? I see a wire hanger.”
This does indeed sit on top of the stove. The wire piece is simply a handle.
“Where do you install this item? Does it go down the stove pipe or somewhere else?”
No installation is needed! Simply put on top of your wood stove and it will blow out heated air into the room.
“Can I use this fan on a wood pellet stove? “
This product has a fairly wide operating temperature range of 140°F – 662°F / 60°C – 350°C. As such, it can indeed be used on a pellet stove, as long as the top surface of the chassis achieves the minimum temperature. Depending on the size and design of the stove, this may or may not be the case.
“Can this fan be used in the fireplace or a direct vent gas stove?”
This fan is designed for use upon a wood stove or wood insert.
- Material: Anodizing Aluminum
- Colour: Black
- Size: 8.8 x 7.1in | 18 x 22.3cm (Height x Width)
- CFM: 180-210
- Speed: 1100rpm
- Blades: 4
- Noise: ≤25dB
- Start Temperature: 140°F / 60°C
- Working Temperature Range: 140°F – 662°F / 60°C – 350°C
- No installation required – comes complete and ready to use.
Get Yours Today!
This is a uniquely effective and convenient technology that can increase further the eco-friendliness, economics and value of your stove or indoor heat source.